Combined Administration of Curcumin and Chondroitin Sulfate Alleviates Cartilage Injury and Inflammation via NF-κB Pathway in Knee Osteoarthritis Rats.

Objective: Osteoarthritis (OA) is a degenerative chronic disease that most often occurs in the knee joint. Studies have shown that some food supplements, such as curcumin and chondroitin sulfate, are effective in treating knee osteoarthritis (KOA) by exhibiting different protective effects. In this study, we further investigated the combined therapeutic effects of curcumin and chondroitin sulfate on cartilage injury in rats with arthritis. Methods: An experimental KOA model was induced by monosodium iodoacetate (MIA) in rats. All rats were randomly divided into five groups: Ctrl (control), model (saline), Cur (20 mg/kg curcumin in saline), CS (100 mg/kg chondroitin sulfate in saline), and CA (20 mg/kg curcumin and 100 mg/kg chondroitin sulfate in saline); drugs were given 2 weeks after MIA injection. The histomorphological changes of cartilage were observed by safranin fast green staining, H&E staining, and micro-CT scanning. Also, the levels of PGE2, TNF-α and IL-1ß in the arthral fluid and serum were determined by the ELISA kits. The activities of SOD, CAT, COMP, MMP-3, and type II collagen were detected by biochemical kits. The expressions of TLR4, p-NF-κB, NF-κB, and COX-2 in cartilage were detected by Western blot. Results: Data show that serum levels of IL-1ß (p < 0.05), SOD (p < 0.0001), and MMP-3 (p < 0.001) were downregulated significantly in the CA group when compared to those in the model group. Meanwhile, obvious repair of cartilage with higher contains collagen II (p < 0.0001) could be observed in the CA group than the ones in Cur or CS group. In addition, significant downregulation of the expression of p-p65/p65 (p < 0.05) was found in the CA group. Conclusion: Our findings showed that combined administration of curcumin and chondroitin sulfate could exert better repair for KOA in rat models. This may hold great promise for discovering potential drugs to treat KOA and may improve treatment options for it.

Stepwise PEG synthesis featuring deprotection and coupling in one pot.

The stepwise synthesis of monodisperse polyethylene glycols (PEGs) and their derivatives usually involves using an acid-labile protecting group such as DMTr and coupling the two PEG moieties together under basic Williamson ether formation conditions. Using this approach, each elongation of PEG is achieved in three steps - deprotection, deprotonation and coupling - in two pots. Here, we report a more convenient approach for PEG synthesis featuring the use of a base-labile protecting group such as the phenethyl group. Using this approach, each elongation of PEG can be achieved in two steps - deprotection and coupling - in only one pot. The deprotonation step, and the isolation and purification of the intermediate product after deprotection using existing approaches are no longer needed when the one-pot approach is used. Because the stepwise PEG synthesis usually requires multiple PEG elongation cycles, the new PEG synthesis method is expected to significantly lower PEG synthesis cost.

Linear Oligosulfoxides: Synthesis and Solubility Studies.

Synthesis of three linear oligosulfoxides containing up to six sulfoxide groups was achieved by multiple SN2 reactions between an alkanethiol and alkyl tosylate to give a linear oligosulfide followed by oxidation of the oligosulfide with sodium periodate to give an oligosulfoxide. The challenge of complete avoidance of partial oxidation and over oxidation was easily overcome using the sodium periodate oxidation conditions. Although sulfoxide is a highly polar functional group, the oligosulfoxides were found to have limited solubility in many solvents including DMSO and water, which disobeys the "like dissolves like" rule. The surprising solubility pattern of oligosulfoxides was discussed in the context of the drastically different solubility patterns of polyethylene glycol (PEG), poly(butylene oxide), and poly(methylene oxide). According to a dissolution model, solubility properties of linear oligomers including the oligosulfoxides and PEGs may be heavily affected by their conformations and the suitability of their conformations in water for maximizing attractive interactions between them and water. Based on these hypotheses, the limited solubility of the present oligosulfoxides may not imply the low solubility of similar molecules.

An amine protecting group deprotectable under nearly neutral oxidative conditions.

The 1,3-dithiane-based dM-Dmoc group was studied for the protection of amino groups. Protection was achieved under mild conditions for aliphatic amines, and under highly reactive conditions for the less reactive arylamines. Moderate to excellent yields were obtained. Deprotection was performed by oxidation followed by treating with a weak base. The yields were good to excellent. The new amino protecting group offers a different dimension of orthogonality in reference to the commonly used amino protecting groups in terms of deprotection conditions. It is expected to allow a collection of transformations to be carried out on the protected substrates that are unattainable using any known protecting groups.

Parallel, Large-Scale, and Long Synthetic Oligodeoxynucleotide Purification Using the Catching Full-Length Sequence by Polymerization Technique.

The catching by polymerization synthetic oligodeoxynucleotide (ODN) purification technique was shown to be potentially suitable for high throughput purification by purifying 12 ODNs simultaneously, to be convenient for large-scale purification by purifying at 60 µmol synthesis scale, and to be highly powerful for long ODN purification by purifying ODNs as long as 303-mer. LC-MS analysis indicated that the ODNs purified with the technique have excellent purity.

Copper-62 labeled ReCCMSH peptide analogs for melanoma PET imaging.

High-specific activity radiolabeled melanocortin peptide preparations are necessary for optimal melanoma imaging due to the relatively low number of melanocortin-1 receptors (MC1-Rs) per tumor cell. In this study, a one-step synthesis of 62Cu-labeled MC1-R targeting peptide Re(Arg11)CCMSH was developed, which yielded high specific activity radiolabeled peptide preparations that required no post-labeling purification. DOTA and NOTA conjugated Re(Arg11)CCMSH peptides were synthesized and examined for 62Cu radiolabeling and cell binding properties. Biodistribution and PET imaging studies were performed to assess the in vivo tumor targeting and imaging characteristics of the optimal radiolabeled peptide. Melanoma cell binding affinities for NOTA-, NOTA-GGG-, and NOTA-GSG- conjugated Re(Arg11)CCMSH were determined to be 1.3×10-9 M, 1.9×10-9 M and 6.0×10-9 M. The 62Cu radiolabeling efficiencies of DOTA- and NOTA- conjugated Re(Arg11)CCMSH analogs were 30% and > 98% after 2 min at 24° C, while 0.5 µg of NOTA-GGG-peptide could be labeled to > 95% with a maximum specific activity of 138 Ci/µmol. Tumor uptake of 62Cu- NOTA-GGG-Re(Arg11)CCMSH in B16/F1 melanoma bearing mice was 4.65±0.48% ID/g and 9.43±2.69% ID/g at 20 and 40 min post injection and was visualized by PET imaging. High specific activity 62Cu-NOTA-GGG-Re(Arg11)CCMSH was prepared in a one-step procedure at 24°C in 6 min. 62Cu-NOTA-GGG-Re(Arg11)CCMSH exhibited MC1-R selective binding and rapid tumor uptake in B16/F1 melanoma bearing mice that was confirmed by PET imaging studies. High specific activity 62Cu from a 62Zn/62Cu generator coupled with simple one step radiolabeling procedures makes 62Cu an attractive radionuclide for PET imaging of low-density receptor targets.

Synthesis and immune response of non-native isomers of vascular endothelial growth factor.

Native proteins often lack immunogenicity and thus limit vaccine and mAb development. We described here a unique method to enhance the immunogenicity of native proteins. This is achieved by creating non-native isomers of disulfide proteins (X-isomers) using the method of disulfide scrambling. X-isomers have the potential to be developed as vaccines and effective immunogens, as they are capable of breaking the immune tolerance and eliciting antibodies that cross-react with the native protein. In this report, we describe production of X-isomers of vascular endothelial growth factor (X-VEGF). The aim is to develop X-VEGF for cancer immunotherapy targeting reduction of VEGF. The production of mouse X-VEGF is achieved by expressing the short version of VEGF (1-110) commonly shared by all VEGF isoforms, with two Cys --> Ala mutations at Cys(51) and Cys(60) to generate R-VEGF(110) (R stands for fully reduced). R-VEGF(110) was then allowed to undergo oxidative folding in the absence of denaturant to form N-VEGF(110) (N stands for native) or in the presence of denaturant to generate five fractions of X-VEGF(110) isomers. While N-VEGF(110) exhibits only marginal immunogenicity in mice, all five fractions of X-VEGF(110) isomers were shown to elicit high titers of antibodies that cross-react with N-VEGF(110). In sera of immunized mice, the amounts of anti-N-VEGF antibodies elicited by X-VEGF(110) isomers range from 54 to 186 mug/mL, which are compatible with or greater than the concentration required for effective therapy using anti-VEGF MAbs. The underlying mechanism of enhanced immunogenicity of X-VEGF(110) is investigated and elaborated. These data suggest that X-VEGF(110) isomers are potential compounds in developing active immunotherapy for treatment of VEGFR bearing tumors and the wet form of age-related macular degeneration.

Rapid and irreversible reduction of protein disulfide bonds.

This report describes the development of a method that enables a rapid (less than 20s), quantitative, and irreversible reduction and inactivation of disulfide-containing proteins at room temperature (20 to 25 degrees C). The formula comprises the ingredients of optimized concentrations of denaturant, reductant, and hydroxide ion. The novelty of this formula is the application of a potent hydroxide ion in the concoction. The component of hydroxide ion serves two major functions. (1) It accelerates the cleavage of disulfide bonds mediated by the reducing agent and denaturant, leading to an instant and quantitative reduction of disulfide proteins. (2) It triggers a rapid covalent destruction of sulfhydryl groups and disulfide bonds via the mechanism of base-catalyzed beta-elimination, thus leading to the irreversible and permanent abolition of disulfide bonds. The usefulness of this formula has been demonstrated here with the effective and rapid reduction of numerous highly stable disulfide-containing proteins, including cardiotoxin and prion aggregates.

Fast and slow tracks in lysozyme folding elucidated by the technique of disulfide scrambling.

GdmCl (6 M) unfolded lysozyme was previously shown to refold via kinetically partitioned pathways (Kiefhaber in Proc Natl Acad Sci 92:9029-9033, 1995). About 80% of the unfolded lysozyme molecules refold on a slow pathway with well-populated intermediates. The remaining 20% of denatured lysozyme refold on a fast track without detectable intermediate. This kinetic heterogeneity has been proposed to originate from the collapsed state of lysozyme folding. Using the method of disulfide scrambling, we demonstrate in this report that these two populations of unfolded lysozyme can be isolated and analyzed separately. GdmCl (6 M) denatured lysozyme actually comprises two major populations of unfolded isomers, namely X-LYZ-a and X-LYZ-b with molar ratio of about 80:20. X-LYZ-a and X-LYZ-b exist in equilibrium in the unfolded state. Their disulfide structures and CD properties indicate that X-LYZ-a is more extensively unfolded than X-LYZ-b. Refolding experiments using the method of disulfide scrambling also show that folding kinetics of X-LYZ-a is about 8-10 times slower than that of X-LYZ-b and folding intermediates of X-LYZ-a is far more heterogeneous than that of X-LYZ-b. The results highlight the implication of the conformational heterogeneity of 6 M GdmCl denatured proteins for the interpretation of the initial stage of protein folding mechanism.

A 3-disulfide mutant of mouse prion protein expression, oxidative folding, reductive unfolding, conformational stability, aggregation and isomerization.

The structure of wild-type mouse prion protein mPrP(23-231) consists of two distinctive segments with approximately equal size, a disordered and flexible N-terminal domain encompassing residues 23-124 and a largely structured C-terminal domain containing about 40% of helical structure and stabilized by one disulfide bond (Cys(178)-Cys(213)). We have expressed a mPrP mutant with 4 Ala/Ser-->Cys replacements, two each at the N-(Cys(36), Cys(112)) and C-(Cys(134), Cys(169)) domains. Our specific aims are to study the interaction between N- and C-domains of mPrP during the oxidative folding and to produce stabilized isomers of mPrP for further analysis. Oxidative folding of fully reduced mutant, mPrP(6C), generates one predominant 3-disulfide isomer, designated as N-mPrP(3SS), which comprises the native disulfide (Cys(178)-Cys(213)) and two non-native disulfide bonds (Cys(36)-Cys(134) and Cys(112)-Cys(169)) that covalently connect the N- and C-domains. In comparison to wild-type mPrP(23-231), N-mPrP(3SS) exhibits an indistinguishable CD spectra, a similar conformational stability in the absence of thiol and a reduced ability to aggregate. In the presence of thiol catalyst and denaturant, N-mPrP(3SS) unfolds and generates diverse isomers that are amenable to further isolation, structural and functional analysis.

Entropic folding pathway of human epidermal growth factor explored by disulfide scrambling and amplified collective motion simulations.

Epidermal growth factor (EGF) regulates cell proliferation and differentiation by binding to the EGF receptor (EGFR) extra-cellular domains. Human EGF is a small, single-chain protein comprising three distinct loops (A, B, and C), which are connected by three disulfide bridges (Cys6-Cys20, Cys14-Cys31, and Cys33-Cys42). These disulfide bridges are essential for structural stability and biological activity. EGF was extensively studied by disulfide scrambling, an experimental technique for the conformational entrapment of intermediate states, which allows us to study the folding pathway of proteins containing disulfide bonds. The experimental results showed that there is a major 2-disulfide intermediate (denoted EGF-II) and that the native disulfide bonding pattern is less prevalent in one of the mutants. In this article, we investigated for the first time the solution conformations of wild-type EGF, EGF-II, and the mutant S9C through extensive molecular dynamics (MD) simulations in water using both the standard MD technique and a recently developed amplified-collective-motion (ACM) sampling method. Compared to standard MD simulations, we achieved a much more enhanced sampling by the ACM simulations, and the structures were sufficiently relaxed to estimate configurational entropies. The simulation results suggest a predominantly entropic folding pathway governed by the disorder of three functional loop regions. Although EGF-II exhibits two native disulfide bonds (Cys14-Cys31 and Cys33- Cys42), its large configurational entropy inhibits a direct transition to the native structure in the folding process. When Ser9 is mutated into Cys, a non-native disulfide bridge Cys9- Cys20 is slightly more favorable than the native Cys6-Cys20 because a less constrained N-terminus affords larger entropy. Isomers that are functionally less active also exhibit a more localized dynamics of the functional loop regions, which may suggest a possible mechanism for the modulation of EGF activity.

Conformational stability of secretory leucocyte protease inhibitor: a protein with no hydrophobic core and very little secondary structure.

Conformational stability of proteins (including disulfide containing proteins) has been routinely characterized by spectroscopic techniques. Proteins which lack adequate signal of circular dichroism may require unconventional technique. Secretory Leucocyte Protease Inhibitor (SLPI) is a 107 amino acids protein with a high density of disulfide pairing (eight). The native SLPI has no hydrophobic core and contains very little hydrogen bonded secondary structure [Gruetter, M., Fendrich, G., Huber, R., and Bode, W. (1988) The 2.5 A X-ray crystal structure of the acid stable proteinase inhibitor from human mucous secretions analyzed in its complex with bovine alpha-chymotrypsin. The EMBO J. 7, 345-352.]. In this study, conformational stability of SLPI has been investigated by the method of disulfide scrambling, which permits quantification of the native and denatured (scrambled) proteins by HPLC. Due to high heterogeneity of denatured SLPI, the native and scrambled SLPI are extensively overlapped on HPLC. This impediment was further overcome by the development of a novel method which distinguishes the native and scrambled isomers of SLPI by exploiting the relative stability of their disulfide bonds. The study reveals mid-point denaturation of SLPI at 1.36 M of GdmSCN, 4.0 M of GdmCl and >8 M urea. Based on the GdmCl denaturation curve, the unfolding free energy (DeltaG(H20)) of SLPI was estimated to be 4.56 kcal/mol. The results of our studies suggest an alternative strategy for analyzing conformational stability of disulfide proteins that are not suitable to the conventional spectroscopic techniques.

Fully oxidized scrambled isomers are essential and predominant folding intermediates of cardiotoxin-III.

Scrambled isomers (X-isomers) are fully oxidized, non-native isomers of disulfide proteins. They have been shown to represent important intermediates along the pathway of oxidative folding of numerous disulfide proteins. A simple method to assess whether X-isomers present as folding intermediate is to conduct oxidative folding of fully reduced protein in the alkaline buffer alone without any supplementing thiol catalyst or redox agent. Cardiotoxin-III (CTX-III) contains 60 amino acids and four disulfide bonds. The mechanism of oxidative folding of CTX-III has been systematically characterized here by analysis of the acid trapped folding intermediates. Folding of CTX-III was shown to proceed sequentially through 1-disulfide, 2-disulfide, 3-disulfide and 4-disulfide (scrambled) isomers as folding intermediates to reach the native structure. When folding of CTX-III was performed in the buffer alone, more than 97% of the protein was trapped as 4-disulfide X-isomers, unable to convert to the native structure due to the absence of thiol catalyst. In the presence of thiol catalyst (GSH) or redox agents (GSH/GSSG), the recovery of native CTX-III was 80-85%. These results demonstrate that X-isomers play an essential and predominant role in the oxidative folding of CTX-III.

Isomers of epidermal growth factor with Ser --> Cys mutation at the N-terminal sequence: isomerization, stability, unfolding, refolding, and structure.

The structure of human epidermal growth factor (EGF, 53 amino acids) comprises three distinct loops (A, B, and C) connected correspondingly by the three native disulfide bonds, Cys(6)-Cys(20), Cys(14)-Cys(31), and Cys(33)-Cys(42). The connection of Cys(6) and Cys(20) forming the N-terminal A loop is essential for the biological activity of EGF [Barnham et al. (1998) Protein Sci. 7, 1738-1749] and has also been shown to represent a major kinetic trap in the oxidative folding of EGF [Chang et al. (2001) J. Biol. Chem. 276, 4845-4852]. To further understand the chemical nature of this kinetic trap, we have prepared three EGF mutants each with a single Ser --> Cys mutation at Ser residues (Ser(2), Ser(4), and Ser(9)) flanking Cys(6). This allows competition between Cys(6) and mutated Cys(2), Cys(4), and Cys(9) to link with Cys(20) and to form EGF isomers containing different sizes of the A loop. The results show that, in the cases of EGF(S2C) and EGF(S4C), native Cys(6)-Cys(20) is favored over Cys(2)-Cys(20) and Cys(4)-Cys(20) by 4.5- and 9-fold, respectively, in the state of equilibrium. However, in the case of EGF(S9C), a non-native Cys(9)-Cys(20) is thermodynamically more stable than the native Cys(6)-Cys(20) by a free-energy difference (DeltaG degrees ) of 1.12 kcal/mol. Implications of these data in the formation of kinetic trap of EGF folding are discussed. Stabilized isomers of EGF were further generated from denaturation of wild-type and mutant EGF via the method of disulfide scrambling. Properties of these diverse isomers of EGF, including their isomerization, stability, unfolding, refolding, and disulfide structures, are described in this paper.

Conformational impurity of disulfide proteins: detection, quantification, and properties.

The conformations of native proteins are in principle, and in most cases, dictated by the law of thermodynamics. Accordingly, a native protein must always exist in equilibrium with a minor concentration of nonnative (denatured) conformational isomers even at nondenaturing conditions. The presence of an infinitesimal quantity of nonnative conformational isomers at physiological conditions is biologically relevant due to their propensity to aggregate, which is an underlying cause of many neurodegenerative diseases. However, their detection and quantification are inherently difficult. In this article, we describe a simple strategy using the technique of disulfide scrambling to identify and quantify such minute concentrations of nonnative isomers. It is demonstrated that even for small stable proteins such as epidermal growth factor and hirudin, approximately 1% of heterogeneous nonnative isomers coexist with the native proteins under physiological conditions.

Assay of disulfide oxidase and isomerase based on the model of hirudin folding.

Oxidative folding of fully reduced hirudin (R-Hir, six cysteines) undergoes two distinct stages. A first stage of nonspecific disulfide formation promoted by oxidase converts R-Hir to form 3-disulfide scrambled hirudins (X-Hir) as obligatory intermediates. A second stage of disulfide shuffling catalyzed by isomerase converts X-Hir to the native hirudin (N-Hir). The model of hirudin folding is utilized here to develop an assay system for measuring the activity of disulfide oxidase and isomerase, using high-performance liquid chromatography (HPLC) quantification of R-Hir, X-Hir, and N-Hir. The oxidase assay measures the ability of an oxidase to promote R-HirX-Hir conversion. The molar specific activity is expressed as mol ofR-Hir decrease per mol of oxidase per min. The isomerase assay measures the ability of an isomerase to catalyze X-HirN-Hir transformation. The molar specific activity is expressed as mol ofN-Hir increase per mol of isomerase per min. Alternatively, the recovery of N-Hir in the isomerase assay can be determined by its alpha-thrombin inhibitory activity. Using both HPLC and activity-based assay, we have measured the relative oxidase and isomerase activity of reduced and oxidized glutathione, Cys, Cys-Cys, and reduced and oxidized protein disulfide isomerase (PDI). The molar specific activity of reduced PDI was shown to be 0.1+/-0.01 U, which is consistent with documented data obtained by the scrambled RNase-A-based assay. These proposed assay methods provide alternatives to the limited option of methodologies currently available for measuring oxidase and isomerase activities. A major merit of the proposed assay system is the potential to accommodate the analysis of biological samples.

Reversible aggregation of mouse prion protein derivatives with PrPSC-like structural properties.

Three carbamylated derivatives of reduced mouse prion protein (mPrP) were isolated during the aborted oxidative folding in the presence of urea. These three prion protein derivatives (mPrP-a, mPrP-b, and mPrP-c) exist as monomer in the acidic solution (pH < 2.0) and exhibit prevalent random coil structure. However, they undergo rapid aggregation and transformation to a predominant beta-sheet structure upon exposure to ionic buffer with pH greater than 3.0. The stability of aggregates of mPrP conformers is in part dependent upon the time that they were allowed to develop. The nascent aggregates comprise a significant fraction of loosely packed mPrP monomers that can be dissociated by treatment with strong acidic solution. Matured aggregates acquired through prolonged sample incubation contain more tightly packed mPrP monomers that cannot be dissociated by strong acid but can be disaggregated by denaturant. The properties of reversible aggregation of mPrP-a, mPrP-b, and mPrP-c bear a striking resemblance to that observed with aggregates of hamster PrPSC.

Isolation and characterization of a polymerized prion protein.

A polymerized form of recombinant mouse prion protein (mPrP) domain 23-231 [mPrP-(23-231)], designated mPrP-z, was generated at acidic pH (pH 2-5) in the presence of selected concentrations of denaturant (2 M guanidinium chloride or 5 M urea). This isoform of mPrP is stable in acidic solution after removal of denaturant. It can be isolated and purified using reversed-phase HPLC or size-exclusion HPLC. mPrP-z bears structural properties that partially resemble those of scrapie prion. Unlike the native mPrP-(23-231) (mPrP-N), mPrP-z exhibits a high content of beta-sheet structure, as shown by CD spectroscopy, and exists as an oligomer with an approximate molecular mass of 340000 Da, as measured by light scattering. However, similarly to mPrP-N, mPrP-z contains the intact disulphide bond and is sensitive to digestion by proteinase K.